Effects of Carbon Nanotube Diameter and Gate-Dielectric Constant on 6T, 8T and 10T CNTFET SRAM: A MATLAB-Based Modelling Study
DOI:
https://doi.org/10.33003/fjs-2026-1023-6508Keywords:
Memory, SRAM, CNTFET, Topology, PDP/EDPAbstract
This paper evaluates the effect of Carbon nanotube (CNT) diameter and gate-dielectric constant (k) on the performance of CNT Field Effect Transistor (CNTFET) Static Random-Access Memory (SRAM) cell topologies (6T, 8T, 10T and 10T modified). Current, Capacitance and Voltage Transfer characteristics (VTCs) models were derived from Cadence-Stanford CNTFET compact model and implemented in MATLAB scripting environment. The evaluation is carried out for all specified SRAM cells with the resulting analytical models by varying CNT diameter (DCNT) and gate-dielectric constant (k) on key SRAM performance metrics, including read/write delay, power consumption, Power-Delay Product (PDP), Energy-Delay Product (EDP) and Static Noise Margin (SNM). Results indicate a 59.5% and 63.4% reduction in read and write delay using silicon dioxide (SiO2) as a gate-dielectric material (k=3.9) within a CNT diameter range of 1.0179-1.644nm for 8T SRAM cell respectively. Furthermore, at 1.95575nm and dielectric constant range of 3.9-30, there is 1.33% increase in power consumption, alongside reductions of 63.9% in write delay, 64.6% in read delay, 63.42% in PDP and 86.8% in EDP respectively. Relative to cadence, this implies substantial improvements with percentage error range of 15-50% across the evaluated performance metrics. Among the evaluated topologies, modified 10T SRAM exhibits high stability, low delay and PDP with increase of 0.97% in SNM, reductions of 64.4% in delay and 99% in PDP/EDP. These findings demonstrate that the analytical framework can effectively capture parameter-dependent performance trends and support analysis and optimization of high-speed, low-power, energy efficient and stable SRAM architectures for future nanoscale memory applications
References
Ahmad, S., Ahmad, S.A., Muqeem, M., Alam, N., & Hasan, M. (2019). TFET-based robust 7T SRAM cell for low power application. IEEE Trans. Electron. Dev, 66 (9), 3834-3840. http://doi: 10.1109/TED.2019.2929495.
Akashe, S., Srivastava, A., & Sharma, S. (2011). Calculation of Power Consumption in 7 Transistor SRAM Cell Using Cadence Tool. International Journal of Advances in Engineering & Technology, IJAET, 1(4), 189–194. Semantic Scholar Corpus ID: 18273564, ISSN: 2231-1963.
Busari, K. A., & Mutari, H. A. (2026). MATLAB-Based Performance Evaluation of an Integrated CMOS-CNTFET 8T SRAM. Dutse Journal of Pure and Applied Sciences (DUJOPAS), 12(3d), 392-404. https://dx.doi.org/10.4314/dujopas.v12i3d.32
Chang, I. J., Kim, J. J., Park, S. P. & Roy, K. (2009). A 32 kb 10T sub-threshold SRAM array with bit-interleaving and differential read scheme in 90 nm CMOS. IEEE J. Solid-State Circuits. 44(2), 650–658. https://doi.org/10.1109/JSSC.2008.2011972.
Deng, J., & Wong, H. -S. P (2007). A Compact SPICE Model for Carbon-Nanotube Field-Effect Transistors Including Nonidealities and Its Application—Part I: Model of the Intrinsic Channel Region. IEEE Transactions on Electron Devices, 54 (12), 3186-3194, http://doi: 10.1109/TED.2007.909030
Devi, M., Madhu, C., Garg, N., Singh, S., & Singh, P. (2021). Design and Stability analysis of CNTFET based SRAM cell, IOP Conf. Ser Mater. Sci Eng, IOP Publishing Ltd. https://doi.org/10.1088/1757-899X/1033/1/012043.
Fei, A. (2024). A review of the development of transistor technology and its application in electronic devices. Proceedings of the 4th International Conference on Materials Chemistry and Environmental Engineering, 10(2), 141–145. https://doi.org/10.54254/2755-2721/56/20240642
Fuad, M. H., & Nayan, M. F. (2026). Impact of material and structural parameters on the performance of advanced low-power CNTFET-based SRAM designs. www.nature.com/scientificreports. 16:11745, 1-21. https://doi.org/10.1038/s41598-026-47254-7.
Fuad, M. H., Noor, S. S., Nayan, M. F., & Russel, R. M. (2025a). Comprehensive analysis of CMOS and CNTFET based 8T SRAM cell. Journal of Electronic Science and Technology, 23(2), 1–13. https://doi.org/10.1016/j.jnlest.2025.100306.
Fuad, M. H., Nayan, M. F., Noor, S. S., & Russel, R. M. (2025b). Comprehensive performance analysis of short-channel effects & switching speed in CNTFETs: A 2D quantum simulation approach. Results in Engineering, 26, 1–18. https://doi.org/10.1016/j.rineng.2025.104513
Fuad, M. H., Noor, S. S., Hassan, K. M. M., Rahman, M., Labony, H. A. K., & Nayan, M. F. (2023). Characterizing CNTFET Logic Gate and Adder Performance Trade-offs by considering CNT Diameter and Dielectric Constant. International Women in Engineering (WIE) Conference on Electrical and Computer Engineering (WIECON-ECE), 1–6. https://doi.org/979-8-3503-1965-1
Fuad, M., Yeassin, R., Raihan, A., & Mahmud, R. R. (2024). Quantum Insights into Dielectric Materials and Oxide thickness-Dependent Conductance in Single- Walled CNTFET : A Parametric Simulation Study. International Conference on Advances in Computing, Communication, Electrical, and Smart Systems (ICACCESS), 8(3), 1–7. https://doi.org/10.1109/iCACCESS61735.2024.10499571.
Gupta, R., & Dasgupta, S. (2019). Process corners analysis of data retention voltage (DRV) for 6T, 8T, and 10T SRAM cells at 45 nm. IETE J. Res, 65 (1), 114–119. http://doi: 10.1080/03772063.2017.1417039.
Jahanirad, H., & Hosseini, M. (2021). An efficient reliability estimation method for CNTFET-based logic circuits. ETRI Journal, 43(4), 728–745, http://doi: 10.4218/etrij.2019-0556.
Kesavan, S. P., & Rajeswari, D. R. (2015). Australian Journal of Basic and Applied Sciences A Review of Power Consumption Analysis for SRAMs. Australian Journal of Basic and Applied Sciences, 9(2), 182–192. https://doi.org/ISSN:1991-8178
Khoder B., Majdeddin A., & Led A. (2020). Impact of changing channel length and band gaps of a carbon nanotube on the current of a Carbon Nanotube Field Effect. Al-Nahrain Journal for Engineering Sciences NJES 23(1), 21-29, http://doi.org/10.29194/NJES.23010021
Kulkarni, J. P., Kim, K. & Roy, K. (2007). A 160 mV robust Schmitt Trigger based subthreshold SRAM. IEEE J. Solid-State Circuits 42(10), 2303–2313. https://doi.org/10.1109/JSSC.2007.897148.
Kumari, A., Rani, S., & Singh, B. (2019). Parameterized comparison of nano-transistors based on CNT and GNR materials: Effect of variation in gate oxide thickness and dielectric constant. J. Electron. Mater. 48(5), 3078–3085. https://doi.org/10.1007/s11664-01 9-07062-4.
Lakshmi, T. V., & Kamaraju, M. (2022). A review on SRAM memory design using FinFET technology. Int. J. Syst. Dyn. Appl. 11(6), 1–21. https://doi.org/10.4018/IJSDA.302665.
Lázaro, A., Nae, B., Moldovan, O., & Iñiguez, B. (2006). A compact quantum model of nanoscale double-gate metal-oxide- semiconductor field-effect transistor for high frequency and noise simulations A compact quantum model of nanoscale double-gate metal-oxide-semiconductor field-effect transistor for high. JOURNAL OF APPLIED PHYSICS, 8(11), 1–12. https://doi.org/10.1063/1.2360379
Liu, H., Nishide, D., Tanaka, T. & Kataura, H. (2011). Large-scale single-chirality separation of single-wall carbon nanotubes by simple gel chromatography. Nat. Commun. https://doi.org/10.1038/ncomms1313.
Maity, R.K., Tripathi, S., Samanta, J., & Bhaumik, J., (2020). Lower complexity error location detection block of adjacent error correcting decoder for SRAMs. IET Comput. Digital Tech, 14 (5), 210–216. http://doi: 10.1049/iet-cdt.2019.0268.
Maleknejad, M., Mirzaee, R. F., Navi, K. & Dargahi, A. (2014). A systematic approach to design Boolean functions using CNFETS and an array of CNFET capacitors. J. Circuits Syst. Comput. https://doi.org/10.1142/S0218126614500352.
Mohammed, M. U., & Chowdhury, M. H. (2018). Reliability and energy efficiency of the tunneling transistor-based 6T SRAM cell in Sub10 nm domain. IEEE Trans. Circuits Syst. II Express Briefs 65(12), 1829–1833. https://doi.org/10.1109/TCSII.2018.2874897.
Murotiya, S. L., Matta, A., & Gupta, A. (2014). Performance Evalution of CNTFET-based SRAM Cell Design. International Journal of Electronics and Electical Engineering, 2(3), 200–205. https://doi.org/10.47893/IJEEE.2014.1098
Nayak, D., Acharya, D.P., Rout, P.K., & Nanda, U. (2018). A novel charge recycle read write assist technique for energy efficient and fast 20 nm 8T-SRAM array. Solid State Electron, 14(8), 43–50. http://doi: 10.1016/j.sse.2018.06.002.
Nayak, D., Rout, P.K., Sahu, S., Acharya, D.P., Nanda, U., & Tripthy, D. (2020). A novel indirect read technique-based SRAM with ability to charge recycle and differential read for low power consumption, high stability and performance. Microelectron. Journal, 97 104723. http://doi: 10.1016/j.mejo.2020.104723.
Natori, K. (1994). Ballistic metal- oxide- semiconductor field effect transistor. Journal of applied Physics. 76 (8), 4879-4890. http://doi: 10.1063/1.357756.
Natori, K., Kimura, Y., & Shimizu, T. (2005). Characteristics of a carbon nanotube field-effect transistor analyzed as a ballistic nanowire field-effect transistor. Journal of Applied Physics, 97(3), doi:10.1063/1.1840096.
Nayan, M. F. (2019). Impact of Temperature on Electrical Characteristics of Ballistic Carbon Nanotube Field Effect Transistor for Different Dielectrics. IJIREEICE, 7(5), 1–7, http://doi: 10.17148/ijireeice.7501
Nidhi, D., & Prashant, D. (2019). A Review Article on Carbon Nanotube Field Effect Transistors Technology. CSVTU Research Journal on Engineering and Technology, 8(1), 56–62. https://doi.org/10.30732/RJET.20190801007
Pal, S., & Islam, A. (2016). Variation tolerant differential 8T SRAM cell for ultralow power applications. IEEE Transactions Computer Aided Design of Integrated Circuits and System, 35(4), 549–558. http://doi: 10.1109/TCAD.2015.2474408.
Pal, S., Bose, S., & Islam, A. (2022). Design of SRAM cell for low power portable healthcare applications. Microsystem Technologies, 28 (3), 833–844. http://doi: 10.1007/s00542-020-04792-z.
Pasandi, G., Jafari, M., & Imani, M. (2015). A new low-power 10T SRAM cell with improved read SNM. Int. J. Electron. 102(10), 1621– 1633. https://doi.org/10.1080/00207217.2014.984642.
Rahaman, M., & Mahapatra, R., (2014). "Design of a 32nm independent gate FinFET based SRAM cell with improved noise margin for low power application," International Conference on Electronics and Communication Systems (ICECS), Coimbatore, India, 1–5, https://doi.org/10.1109/ECS.2014.6892721.
Rao, M.V.N., Hema, M., & Raghutu, R., et al., (2023). Design and development of efficient SRAM Cell based on FinFET for low power memory applications. Journal Electrical and Computational Engineering, 1-8, 7069746. http://doi: 10.1155/2023/7069746.
Rastogi, P., Dutta, T., Kumar, S., Agarwal, A., & Chauhan, Y.S. (2015). Quantum confinement effects in extremely thin body germanium n-MOSFETs. IEEE Transactions on Electron Devices 62 (11), 3575–3580. http://doi: 10.1108/TED.2015.2478794.
Sharma, V. K., & Kumar, A. (2025). A novel 8T SRAM cell using PFC and PPC VS-CNTFET transistor. Journal of Engineering and Applied Science, 72(1), 1–21. https://doi.org/10.1186/s44147-025-00579-y
Shilpi, B., Singh, R.K., & Pattnaik, M. (2011). Static Noise Margin Analysis of Various SRAM Topologies. IACSIT International Journal of Engineering and Technology, 3(3); 304-309.
Singh, A., Jain, P., & Gupta, T.K. (2014). High Performance & Improved 8T SRAM Cell. International Journal of Engineering Research & Technology (IJERT), 3(9), 922-926. ISSN: 2278-0181.
Sinha, S.K., & Chaudhury, S. (2012). Oxide thickness effect on quantum capacitance in single-gate MOSFET and CNTFET devices. Annual IEEE India Conference, INDICON, 42–46. https://doi.org/10.1109/INDCON.2012.6420586.
Sinha, S.K., Singh, P., & Chaudhury, S. (2014). Effect of temperature and chiral vector on emerging CNTFET device, in: International Conference on Computing for Sustainable Global Development, INDIACom IEEE Computer Society: 432–435. https://doi.org/10.1109/IndiaCom.2014.6828174.
Sze, S. M., & Ng, K. K. (2007). Physics of Semiconductor Devices. (3rd Edition). A JOHN WILEY & SONS, JNC.,. Hoboken, New Jersey and Canada.
Tan, M.L.P., Lentaris, G., & Amaratunga, G. (2012). Device and circuit-level performance of carbon nanotube field-effect transistor with benchmarking against a nano-MOSFET, Nanoscale Res. Lett. 7 (1) 467, http://doi: 10.1186/1556-276X-7-467.
Taur, Y., & Ning, T. H. (2013). Fundamentals of Modern " VLSI Devices. (2nd Edition). CAMBRIDGE UNIVERSITY PRESS. New York, USA.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Busari Kehinde Abdulsemiu, Mutari Hajara Ali

This work is licensed under a Creative Commons Attribution 4.0 International License.